Thermal spraying techniques are COATING processes in which melted (or heated) materials are sprayed onto a surface. The “feedstock” (coating precursor) is heated by electrical (plasma or arc) or chemical means (combustion flame).

Hardfacing is a metalworking process where harder or tougher material is applied to a base metal. It is Hardfacing WELDED to the base material, and generally takes the form of specialized electrodes for ARC WELDING or filler rod for OXYACETYLENE and TIG welding.

A gas turbine, also called a combustion turbine, is a type of continuous and internal combustion engine. The main elements common to all gas turbine engines are: an upstream rotating gas compressor a combustor a downstream turbine on the same shaft as the compressor.

Thrust-to-weight ratio is a dimensionless ratio of thrust to weight of a rocket, jet engine, propeller engine, or a vehicle propelled by such an engine that is an indicator of the performance of the engine or vehicle.

The Zn/Al wires are manufactured from virgin S.H.G Zinc and Aluminum Ingots by the process which ensures that the material meets requirement of the specification. Conforming to IS-12447, DIN 14919:2001,EN 1179 Z1, ASTM B833-06)

The Zn/Al wires are manufactured from virgin S.H.G Zinc and Aluminum Ingots by the process which ensures that the material meets requirement of the specification. The manufactured wire should have a smooth finish, free from defects that may affect thefeeding of the wire to the spray gun Available in alloys 95/5; 90/10; 85/15 and others at the customer request.

Aluminum wires are manufactured from and High Purity aluminum (Conforming to EN 576, ISO 209-1:2007, EN 573-3:2009, ASTM B833-06 ) and provide even more corrosion protection than pure zinc wires with lower overspray.