11ED ELECTRIC DRIVE WIRE FLAME SPRAY GUN
Thermal Spray Wire & Welding Wires
The Metal Coat 11ED-Electric Drive Wire Flame Spray Gun is designed for spraying soft thermal spray wires such as Zinc, Lead, Tin, Aluminium, Babbitt etc.
The Metal Coat 11ED Wire Flame Spray Gun is powered by a DC Motor, developed after years of our experience and research in the thermal spray industry. This is the best gun in the segment for spraying soft wires such as aluminium, zinc, lead, tin, babbitt, etc. The 11ED Wire Flame Spray Gun has minimum parts compared to other wire flame spray models, with maximum ease of maintenance. The DC motor in the wire flame Spray Gun gives a constant wire feed rate, which results in the superior quality of coatings.
For ease of viewing the wire feed unit, wire feed rollers are placed in the transparent box. The box can be easily opened without any tool to remove the wire chips or any dust that may accumulate after spraying.
11ED Wire Flame Spray Setup
WIRE FLAME SPRAY GUN-11ED
|Wire Feed||DC Motor|
|Wire Size Standard||1/8” (3.17mm)|
|Wire Size Optional||11G, 15G, 1.6mm, 2mm, 2.5mm|
|Gasses Used||Oxygen and Fuel Gas|
|Fuel Gas||Acetylene or LPG / Propane etc.|
|Compressed Air||35 CFM at 75 psi (5 bar)|
|Net Weight||Approx. 4.6 Kg. (Gun Only)|
|Shipping Weight||Approx. 6 Kg|
- The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
- Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.