POWDER FEEDER MPF 3350
All Products
Thermal Spray Wire & Welding Wires
The MPF3350 Powder Feeder is specifically designed for thermal spray coatings. Its compact size makes it a portable powder feeder, which can be carried to site for job work. The unit is controlled to extremely precise and repeatable feed rates. The powder hopper (canister) is mounted on a hinged plate which allows users to easily remove excess powder and clean the interior. Separate powder feed and carrier gas controls make it simple to clear excess material throughout the spray system. Remote operation switch can be added to any gun.
TECHNICAL SPECIFICATIONS
| Number of Canisters | 1 (one) |
| Canister Capacity | 3350 CC Each |
| Canister Dimensions | 120mm (Inner Dia.) x 310mm (Height) |
| Cabinet Dimensions | 16.5” L x 16.5” B x 26” H |
| Electricity | 220V/ 1P/ 50-60 Hz OR 110V/ 1P/ 50-60 Hz |
| Weight | 42 Kg (Approx.) |
FEATURES
- Feed rate can be easily varied from 1 RPM up to 29 RPM.
- Large canister capacity.
- Low wear and maintenance requirement.
- It has a digital display which ensures correct readings
- Remote or Local powder feed control selectable.
- Sensor less vector control technology for accurate RPM control.
- It is compatible to a wide range of thermal equipment such as Plasma, HVOF System and Combustion Powder Flame spray systems.
- This unit is provided with powder pressure gauge to regulate the pressure accurately.
- Safety Valve is provided to release high canister pressure when required.
Note:
[email protected]
- The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
- Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.
[email protected]