• Home
  • ARC SPRAY GUN (AIR DRIVE)

ARC SPRAY GUN (AIR DRIVE)

All Products

Thermal Spray Wire & Welding Wires

MODEL: 100AD

ARC SPRAY SYSTEM SETUP

SPECIFICATION

TypeFeature Description
Size310mm (L) 80mm (W) 260mm (H)
DrivePneumatic Motor
Net Weight3.6 Kgs

POWER SOURCE WITH CONTROL CONSOLE

MODEL: 100AD

The control consul works on two operating modes – pneumatic driven and DC electric driven motor for wire feed to the spray nozzle. In the first mode the spray gun is hand held and pulls the wire into the nozzle to get atomized. Where as in second mode the Arc Spray Gun (DC Drive) is attached to an electric driven motor to pull the wire into the spray system. When there is a need to operate the spray gun in Lathe Tool post or robot Arc Spray Gun (Air Drive) is recommended for manual operation as it is light in weight. The system is completely mobile and is mounted with trolley wheels for the ease of movement according to the need of operation, A high velocity air facility is inbuilt in the control panel to increase the velocity of the particle for enhanced deposition efficiency, bond strength and fine spray.FEATURES

Arc Spray System

Model: 250 AMP

Model: 400 AMP

Model: 600 AMP

MAX MELTING OUTPUT (KG./HR.)
Zinc
Aluminum
Cr-Ni-Steel
Al-Bronze

15.00
4.30
6.60 – 7.15
7.50 – 7.95

30.00
8.60
13.20-14.30
15.00-15.90

45.00
12.90
19.80-21.45
22.50-23.85

MAXIMUM COVERAGE (M /100M/HR)
Zinc
Aluminum
Cr-Ni-Steel
Al-Bronze

13.05
13.03
7.29
10.90

26.10
26.06
14.58
21.78

39.15
39.10
21.87
32.67

High Velocity option installed

no

On Request

yes

Wire Size ( Diameter)

1.6mm to 2mm

1.6mm to 3.17mm

2mm to 3.17mm

Wire Feed

Both Pneumatic & Electric Drive

Both Pneumatic & Electric Drive

Both Pneumatic & Electric Drive

Power Source with control console weight

117 kgs. (approx.)

156 kgs. (approx.)

333 kgs. (approx.)

Dimension

37” x 18” x 39”

40” x 22” x 43”

36” x 26.5” x 45”

Power Requirement

7KW / 9.5 HP

15KW / 20 HP

25KW / 33.5 HP

POWER SOURCE INPUT
Voltage (V)
Phase (nos)
Frequency (Hz)
Rating:@60% Duty Cycle
@100% Duty Cycle

415V±10
3
50
22.5 (KVA)
18 (KVA)

415V±10
3
50
22.5 (KVA)
18 (KVA)

415V±10
3
50
39 (KVA)
31 (KVA)

Power Source Output
Static Characteristics
Open Circuit
Voltage Range

Constant
Potential
18-40

Constant
Potential
18-54

Constant
Potential
65

MAX.OUTPUT CURRENT
@60% Duty Cycle
@100% Duty Cycle

250 (Amp.)
190 (Amp.)

400 (Amp.)
310 (Amp.)

600 (Amp.)
465 (Amp.)

PORTABLE WIRE FEED & GUN STAND

HOSES & CABLES

Note:
  • The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
  • Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.
Metal spray coating is an exclusive distributor in all of America. for more information
 [email protected]