14M WIRE FLAME SPRAY GUN
Thermal Spray Wire & Welding Wires
Suitable for both high and low melting point wires such as Aluminium, Babbitt, Molybdenum, Copper, Brass, etc.
The Metal Coat 14M Wire Flame Spray Gun is lightweight equipment that uses an air turbine to draw the wire in, melt it with fuel gas and blast the molten particles onto the substrate. This versatile gun features a convenient wire feed thumb trigger making it a preferred choice for hand-held use. The Metal Coat Flame Spray Gun 14M has a universal gas head, adapted to use Oxy/Acetylene or Oxy/Propane fuel gas. The standard gun can spray about 1/8″ wire using acetylene because of the fuel gas. Suitable hardware is available on request for handling all the standard wire sizes starting from 3/16″ right down to 1/16″. The flame spray torch’s controlled speed range from about 2 to 15 feet per minute (0.6 – 4.6 m/min) with standard gears; to approximately 5 to 45 feet per minute (1.5 – 14 m/min) with the easily
installed, high-speed gear set.
Although, the 14M Wire Flame Spray Equipment has been designed primarily for hand-held operation, a simple, rugged tool post fixture may be provided with the equipment to allow easy mounting on a machine tool such as a lathe. The whole system (except the compressor) can be mounted on a cart for mobile applications and field repair work.
14M WIRE FLAME SPRAY SETUP
SPRAY COATING WIRES USED
WIRE FLAME SPRAY GUN-14 M
|Wire Feed||Air Turbine|
|Wire Size Standard||1/8” (3.17mm)|
|Wire Size Optional||15G, 11G, 3/16” (4.76mm)|
|Gasses Used||Oxygen and Fuel Gas|
|Fuel Gas||Acetylene or LPG / Propane etc.|
|Compressed Air||35 CFM FAD at 75 psi (5 bar)|
|Net Weight||Approx. 2.7 Kg. (Gun Only)|
|Shipping Weight||Approx. 6 Kg|
TYPICAL SPRAY RATE WITH 1/8” WIRE
|Carbon Steel||5.9 Kg./Hour|
- The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
- Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.