- Home
- 5KM WIRE FLAME SPRAY GUN
5KM WIRE FLAME SPRAY GUN
All Products
Thermal Spray Wire & Welding Wires

The Metal Coat 5KM Wire Flame Spray Gun has been developed to spray any wire made for thermal spray application, from soft, low-melt point materials such as Zinc, Babbitt to high-melt wires such as Stainless or Molybdenum.
The Metal Coat 5KM Wire Flame Spray Gun is specially designed for an automated and mass production environment. It is suitable for long continuous spray periods while maintaining consistent coating quality. It operates reliably and economically; with the least minimum downtime. The gun is driven by a powerful constant speed motor that provides precise control over the wire speed. With its robust variable speed motor, the powerful wire drive system delivers a constant and smooth feed of the wire material throughout the coating process. A speed control regulator is mounted on the gun to facilitate easy regulation of the wire speed. An external wire feed panel is provided with the gun, which displays the wire speed. Whenever there is a need for maintenance, the 5KM gun can be serviced quickly and hence, returning to production with minimal downtime.

- Synchro Rings
- Piston Rings
- High-volume corrosion applications Tube Mill Applications
- Shifter Forks
5KM GUN ARE SUITABLE FOR MASS-PRODUCTION COATING OF
5KM WIRE FLAME SPRAY SETUP

5KM WIRE FLAME SPRAY GUN SPECIFICATIONS
Coating Wire Size | 0.813 to 4.76mm | 20 Gauge to 3/16 inch |
Weight approximate without hose and cables | 10.8 Kg | |
Fuel Gas Oxygen | Acetylene ,hydrogen, Propane ,MPS,MAPP or natural gas (methane) | |
Compressed air (Dry & Oil Free) | 0.6 m /min at 3.4 to 4.5bar | 20 ft m /min at 50 to 65 psi |
Available Extensions | 6 inch, 1 Feet long |
- The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
- Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.
[email protected]