12ED ELECTRIC DRIVE WIRE FLAME SPRAY GUN
Thermal Spray Wire & Welding Wires
Suitable for spraying hard wires like Stainless-Steel, Molybdenum, etc.
The Metal Coat 12ED Wire Flame spray gun is the state-of-the-art electric drive wire flame spray gun. Here, in this model, an AC powered motor is provided, which ensures constant wire feed rates, thereby preventing any variation in speed that may occur in air-driven wire feeding. The constant wire feed rate makes it very easy to spray hard wire such as Molybdenum, Stainless Steel, Mild Steel, etc. and results in excellent coatings. The 12ED Model requires comparatively less maintenance than the other wire flame spray torches.
For ease of viewing the wire feed unit, wire feed rollers are placed in the transparent box. The box can be easily opened without any tool to remove the wire chips or any dust that may accumulate after spraying.
SPRAY COATING WIRES USED
The Metal Coat 12ED Wire Flame Spray Manufacturer Torch Model is designed to spray hard wires like
stainless steel, Molybdenum with ease. The standard wire size used is 1/8″ (3.17mm). It can also spray
wire sizes of 11G, 15G, 1.6mm, 2mm, and 2.5mm.
12ED WIRE FLAME SPRAY SETUP
WIRE FLAME SPRAY GUN-12ED
|Wire Feed||DC Motor|
|Wire Size Standard||1/8” (3.17mm)|
|Wire Size Optional||11G, 15G, 1.6mm, 2mm, 2.5mm|
|Gasses Used||Oxygen and Fuel Gas|
|Fuel Gas||Acetylene or LPG / Propane etc.|
|Compressed Air||35 CFM FAD at 75 psi (5 bar)|
|Net Weight||Approx. 4.6 Kg. (Gun Only)|
|Shipping Weight||Approx. 6 Kg|
- The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
- Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.