DRY SPRAY BOOTH FOR LPG CYLINDER
Thermal Spray Wire & Welding Wires
The dust and fume created during Zinc Metallizing process is sucked by the exhaust fan mounted on Fabric Dust Collector. The Cyclone collect the coarse dust and very fine dust get collected in the Fabric Bag Dust Collector, keeping the environment clean and friendly
The Spray Booth is fabricated from heavy gauge MS Sheet in folded and welded construction with requisite strength and rigidity.
Spray Booth Opening – 900mm (W) x 750mm (H)
TRACK & TWIN ROLLER CONVEYOR
Track is provided on both the sides of the Spray Booth to accommodate twin roller conveyor. The Conveyor is driven by electric motor. Three step pulley
arrangement is also provided for speed adjustment.
Track Dimension : 1225mm (L) x 625mm (H)
Drive: 1.5 HP/415V/3P/ 50Hz with Gear Box
TWIN CYCLONE DUST COLLECTOR
FABRIC BAG DUST COLLECTOR
Suitable ducting from spray booth outlet to inlet of cyclone dust collector and from cyclone dust collector outlet to inlet of fabric bag dust collector is provided.
Control Panel with Wiring
A Control Panel is provided to house push button / switches for motors of dust collector and motor of twin roller conveyor.
- The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
- Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.