AIR BLAST CABINETS

Home
AIR BLAST CABINETS

All Products

Thermal Spray Wire & Welding Wires

HIGH PURITY ZINC WIRES
HIGH PURITY ALUMINUM WIRE
HIGH PURITY ZINC ALUMINUM WIRE

THERMAL SPRAY WIRE
INDUSTRIAL HARDFACING
GAS TURBINE
HVOF POWDER

Air blast cabinets can take the form of a blast cabinet, the blast media is pneumatically accelerated by compressed air and projected by nozzles on to the component.

We manufacture Blasting Cabinets, which works on the principle of direct pressure blasting, inductionsuction blasting and slurry pumping. The blasting is done via Guns, as
the abrasives are introduced using compressed air. This whole process is carried out in closed chambers ensuring safety and dust free blasting. The cabinets are fabricated
from heavy gauge mild steel, so it can withstand bombarding of abrasives.

The abrasives are recollected and re-circulated in the chamber. Dust bags are also provided, to separate dust and debris from abrasives. For the shaking of Dust Bags,
manual and motorized shaking is used.

MACHINES ARE USED FOR:

SUCTION BLAST CABINETS

PRESSURE BLAST CABINETS

It is based on the principle of Induction-Suction abrasive blasting. Best suitable for blast cleaning, de-burring, de-scaling, removing thin deposits on soft metalparts and de-flashing of plastic goods and molded components. It is also used to provide a matte finish. It is the simplest and most effective way for removing corrosion and old paint. The machine actuates by pressing the foot pedal, extracting air which mixes with the air and finally ejected via gun through nozzles pressure

It is based on direct pressure principle of blasting. The pressure blasterproduces high abrasive velocity which results in completing the job at a faster rate. Apressure vessel, directly bolted below a hopper of a cabinet, has an automatic abrasive refilling arrangement. It is recommended for removing heavy and thick scales, de-burring and de-flashing is done by selecting medium and coarse grain.

FEATURES

Easy vision: We provide large window glass (protected by a wire screen assembly). Also, high illumination is used for clear visibility while blasting.
Gasketted Doors are provided with locking systems and are easy in operation. Slider doors are also available.
The stand on which operator stands, is designed for relaxing working. Also, foot switch is provided for operator for easy control.
Generally, all cabinets are rubber lined.
The operator can use both his hands via sealed hand holes for holding a gun, thus ensuring maximum safety.
Simple in operation and ready to operate when connected to electrical and air supply. No erection required.
Easy fitment of spares, whenever required.
The environment is dust free because of dust collection assembly. Noise level is maintained at below 80 DBA. Also, proper ventilation is provided for easy visibility.

ABRASIVE MEDIA

Abrasive media for shot blasting equipment is used for a wide variety of applications including abrasive blasting, shot peening, deburring, polishing, and other surface finish
processes. The abrasive media are available in a wide range of types, hardness, grit and mesh sizes.

APPLICATION AREA / TO BE USED FOR:

ALUMINUM OXIDE GRIT	GLASS BEAD	STEEL SHOT	STEEL SHOT	STEEL SHOT	CHILLED IRON SHOT
Aluminum Oxide Grit is a sharp, long lasting abrasive media that is highly efficient and highly reusable. Harder than most blast media, Aluminum Oxide Blast Media, will clean and etch quickly on all type of surfaces.	Glass Beads are a round, spherical media that produce a clean, bright, peened, satin finish, without dimensional change of the parts. It used for blasting, peening, honing, cleaning, and light deburring.	Steel Shot is ideal for peening applications to impart a clean, smooth finish. This dense, smooth media can be used up to 3,000 times and produces minimal dust during the blasting process.	Steel Grit is an angular, carbon steel media designed for quick and effective removal of surface contaminants and coatings. Steel Grit is softer than other media and is less likely to fracture leaving an etched finish.	Chilled iron is a hard abrasive making it suitable for etching purposes, but less resistant to impact. It is suitable to be used in blast rooms for fast cleaning and edging.	Chilled iron shots are round shape having white structure made from cast iron scrap. These are widely used for cleaning in foundries, in castings for sand removal , removing old paints, blasting blasting of stone etc.
Mesh Size: 12 – 240 / Size mm : 1.40 – 0.06	Mesh Size: 18 – 350 / Size mm : 0.85 – 0.04	Mesh Size: 8 – 52 / Size mm : 2.00 – 0.30	Mesh Size: 12 – 52 / Size mm : 1.40 – 0.30	Mesh Size: 8 – 120 / Size mm : 2.00 – 0.09	Mesh Size: 8 – 52 / Size mm : 2.00 – 0.30

	SB-6060	Sb-9182	SB-12090	PB-9182	PB-12090	PB-12090
Working Chamber Height (mm) Width (mm) Depth (mm)	600 600 600	0.5	900 1200 900	775 910 820	900 1200 900	900 1500 1200
Overall Dimensions: Height (mm) Width (mm) Depth (mm)	1660 800 1500	2120 1070 1400	32570 1365 1700	2130 1100 2500	2030 1365 2430	2080 1665 2730
Approx. Weight (Kgs.)	250	380	490	580	650	760
Nozzle Orifice (mm) Standard size supplied unless ordered otherwise	*6 8	*8 10,12	*10 8,12	*5 6	650	*5 6
Injector orifice	*2 3	*3 4,5.5	*10 8,12	–	–	–
Abrasive Storage Capacity Ltrs.	28	28	42	28	42	42
Abrasive Storage Capacity Ltrs.	200	400	600	500	500	800
Compressed Air Required (cfm) at 5.63 Kg./Sq. Cm (80 psi)	25	25	35	–	–	–
Dust Collector/Mist Collector / Reclaimer Fan Motor HP	0.5	1.0	1.5	1.0	1.0	1.5

PRODUCTION OUTPUT	MEDIUM & LOW	HIGH & MEDIUM
BLASTING MEDIA SIZE	MEDIUM & FINE	COARSE & MEDIUM
BLASTING SURFACE	THIN & DEPOSITE	THICK & DEPOSITE
DE-FLASHING / DE-BURRING	SOFT METAL PARTS	HARD METAL PAR

Note:

The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.

Metal spray coating is an exclusive distributor in all of America. for more information
[email protected]