11M WIRE FLAME SPRAY GUN
Thermal Spray Wire & Welding Wires
The Metal Coat 11M Wire Flame Spray Gun is developed to run at high-speed, allowing the user to spray the required soft wire material to the substrate efficiently and economically. This gun is convenient for hand-held or starts/stop operation due to the wire feed thumb trigger. This gun is engineered for soft-wire applications and cannot spray hard materials like Stainless Steel, Nickel, Bronze, Copper, and others.
The 11M Wire Flame Spray equipment model can be used for smaller jobs as well as cranking our large-area applications. It can spray 1/8″ (3.17mm), 5/12″ (3.97mm), and 3/16″(4.76mm) soft metalizing wires of Lead, Aluminium, Zinc, Tin, and Babbitt, with low melting points. Numerous accessories increase the equipment’s versatility, including various Air Cap, Nozzle, and Siphon plug configurations that result in exceptional coating quality and economical operation. Converting from one size of wire to another is quick and simple. The equipment is often used for coating or repairing other metals in severely corrosive environments. The gun is ideal for hand-held, fixed, or mobile applications. The entire system (except the compressor) can be mounted on a cart for mobile applications and field repair work.
11M WIRE FLAME SPRAY SETUP
SPRAY COATING WIRES USED
WIRE FLAME SPRAY GUN-11M
|Wire Feed||Air Turbine|
|Wire Size Standard||1/8” (3.17mm)|
|Wire Size Optional||5/32” (3.97mm), 3/16” (4.76mm)|
|Fuel Gas||Acetylene or LPG / Propane etc.|
|Compressed Air||35 CFM FAD at 75 psi (5 bar)|
|Start Stop Operation||By thumb operated wire feed valve|
OUTPUT ( SPRAY RATE )
|Aluminum||05.00 Kg./Hr approx|
|Zinc||21.80 Kg./Hr approx|
|Pure Tin||22.70 Kg./Hr approx|
|Babbitt||22.70 Kg./Hr approx|
- The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
- Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.